Journal

Caring for flamed and honed stone

·The Pietra team

Caring for flamed and honed stone

The finish changes how you clean the stone, not what it is made of. Honed and flamed can be the same travertine. Both are still calcareous. Vinegar, lemon, bleach and limescale remover suit them equally badly.

Almost every Pietra table leaves honed: the face is matte and smooth, soft under the hand. Flamed is a thermal shock that opens the grain and leaves a rough texture, usual on floors and outdoors, not on the tables in this collection. If your piece is a flamed floor and not one of our tables, the gesture changes; the chemistry does not.

Honed

Clean it with a soft cloth, warm water and pH-neutral soap, and dry it. The matte face hides use, and it also hides a light acid etch, which cuts both ways: the mark shows less, the damage is there. Do not bring the matte back with a scouring pad. What that does is scratch.

Travertine still wants a seal, honed or not, because the pore does not vanish with the finish. The water-drop test and the 12–18 month span are in the table guide.

Flamed

The texture holds dust and soap in the valleys of the grain. A cloth alone does not reach. You need a soft brush, never metal and never a scouring pad, warm water and the same neutral soap, and a proper rinse so white foam does not sit in the pits. Dry what you can. On an outdoor floor the water leaves on its own; on an indoor piece, it does not.

We do not sell flamed tables in the published catalogue. If you commissioned that finish to order, say so when you write: the kit does not change, the cleaning tool does.

What they share

To see a honed face on a piece, start with the coffee tables. The stone comparison, if you are still choosing a material, is travertine or marble.

Frequently asked questions

What finish do Pietra tables have?

Almost all of them leave honed: matte and smooth. Flamed is not in the table catalogue; it belongs more to floors and the outdoors.

Is flamed stone cleaned the same way?

The chemistry is: pH-neutral, no acids. The tool is not: flamed stone wants a soft brush and a thorough rinse, not a cloth alone.

Can I use a scouring pad on flamed stone because it is rough?

No. A scouring pad scratches the grain. Use a soft brush, never a metal one.

The collection

The stone, in person

Every piece is hand-carved to order, with the unique veining of its block. Start with the coffee tables.